ByTune Electronics Co.,Ltd
Manufacture Factory :
Add: A5 building , Songbai RD 3055 , Gongming Street, Guangming district, ZhenZhen, 518100,China
Fax: 0755-8529 6631
Tel: +86-755-2964 2158
Fax: +86-755-2350 3855
Mobile: 189 2742 5032
Add:6th Floor, C building, New generation ;Hi-tech Park,28 district, Bao'an, ShenZhen,518125,China
Rotary Joint, Slip Ring, Sliprings manufacturer / supplier in China, offering Slip Rings for Lighting Displays with High Functional Component, Manufacturer BTH50120 Slip Ring for Architectural Equipment, Manufacturer Generator Slip Ring for Surveillance Cameras and so on.
14mm (very thin design)
With ball bearing
Rotating smooth and contacting reliable
|Model NO.:BTH70155-X||Application:Power, RF, Audio & Video|
|Package:Bubble Bag+Carton||Specification:CE, ROHS|
|Trademark:ByTune Electronics||Origin:ShenZhen, China|
|Opreating Speed:0~600rpm||Structure Metal: Previous metal|
|IP Grade:IP54~IP68||Opreating Humility:75%Rh or Higher|
|Longlife:120,000,000cycles or More||HS Code:85369090|
|Production Capacity:50, 000PCS/Year|
Slip rings of BTH series can be used to mount the slip ring on a bracket or used for routing space for hydraulics.Multi-contacting can ensure contacting reliable with low wear.The through hole can be from 2.0mm to 1200mm.
Suffice 360 degree unrestrained continuous rotation
to transmit power or data.
Operating smoothly and reliability
Extremely low electrical noise
Precious metal contact ensures long life-span
Convenient to assembly
Modularized design and also provide customized solutions.
Compatible with data bus protocols
Electrical test equipment
|Exhibit / display equipment|
|Manufacturing and process control equipment||Laboratory equipment|
|Indexing tables, Cable reels||Camera system|
|Robotics, rotary sensors, urgent illumination||Aviation, military, marine and medical|
Operation speed, current &voltage
|Flange mounting||Position of wire outlet|
|No. of circuits||Protection level (dust and water)|
|Housing material||Signal,power and data transmitted or|
|Inner diameter||combination transmitted|
|Rated Current||10A, 15A or 20A||5A|
|Lead Size||UL, AWG16 tinning TEFLON for 10A|
AWG14 tinning TEFLON for 15A and 20A
|UL, AWG22 silver plated TEFLON|
|Dielectric Strength||1000VAC@60Hz,60s between each circuit|
|Lead length||Standard 300mm|
|Working Temperature||-40C - +80C|
|Working Humidity||75%RH or higher|
|Contact Material||Precious Metal|
|Bearing||Steel ball bearings|
|Structure Material||Engineering Plastic or metal|
|Torque||0.1N/m for 6 rings, 0.03N/m increased for every 6 rings added.|
|IP Rating||IP 54~IP68|
|Operational life||120,000,000cycles (Depends upon working temperature, rotating speed,|
environment and continuous working time)
1.Position the slip ring in the desired location and tighten four screws to shaft.
2.Route the wiring and make the necessary connections,fasten the anti-rotation tab.
1.Slip ring can not support the weight of equipment which connects with it, roating equipment should be fastened
so that its weight will not fall on the rotor.
2.Slip ring should be used in dry,low dust environment.If used outdoor,shield is necessary.
3.The surface of lead wire should avoid being damaged while equiment rotating,all lead wire can not bear
weight while you put the lead wire in order.
4.No damaging the surface of lead wire while barking its end.