Hollow Shaft Electric Slip Ring (BTH70155)
|Model NO.:BTH70155||Application:Power, RF, Audio & Video|
|Package:Bubble Bag + Carton||Specification:CE, RoHS|
|Trademark:Hangzhou Grand Technology||Origin:Hangzhou China|
|Dielectric Strength:500VAC@50Hz, 60s||Rated Voltage:380VAC/240VDC|
|HS Code:85369090||Production Capacity:50000PCS/Year|
Slip rings of BTH series can be used to mount the slip ring on a bracket or used for routing space for hydraulics.Multi-contacting can ensure contacting reliable with low wear.The through hole can be from 2.0mm to 1200mm.
Suffice 360 degree unrestrained continuous rotation
to transmit power or data.
Operating smoothly and reliability
Extremely low electrical noise Precious metal contact ensures long life-span
Convenient to assembly Modularized design and also provide customized solutions.
Compatible with data bus protocols
Electrical test equipment
|Exhibit / display equipment|
|Manufacturing and process control equipment||Laboratory equipment|
|Indexing tables, Cable reels||Camera system|
|Robotics, rotary sensors, urgent illumination||Aviation, military, marine and medical|
Operation speed, current &voltage
|Flange mounting||Position of wire outlet|
|No. of circuits||Protection level (dust and water)|
|Housing material||Signal,power and data transmitted or|
|Inner diameter||combination transmitted|
|Rated Current||10A, 15A or 20A||5A|
|Lead Size||AWG16 tinning TEF for 10A|
AWG14 tinning TEF for 15A and 20A
|AWG22 silver plated TEF|
|Dielectric Strength||1000VAC@60Hz,60s between each circuit|
|Lead length||Standard 300mm|
|Working Temperature||-40C - +80C|
|Working Humidity||75%RH or higher|
|Contact Material||Precious Metal|
|Bearing||Steel ball bearings|
|Structure Material||Engineering Plastic or metal|
|Torque||0.1N/m for 6 rings, 0.03N/m increased for every 6 rings added.|
|IP Rating||IP 54~IP68|
|Operational life||12,000,000cycles (Depends upon working temperature, rotating speed,|
environment and continuous working time)
1.Position the slip ring in the desired location and tighten four screws to shaft.
2.Route the wiring and make the necessary connections,fasten the anti-rotation tab.
1.Slip ring can not support the weight of equipment which connects with it, roating equipment should be fastened
so that its weight will not fall on the rotor.
2.Slip ring should be used in dry,low dust environment.If used outdoor,shield is necessary.
3.The surface of lead wire should avoid being damaged while equiment rotating,all lead wire can not bear
weight while you put the lead wire in order.
4.No damaging the surface of lead wire while barking its end.
Related Industry Knowledge
- Set ring manufacturers in the marke...
- What slip ring more competitive adv...
- Slip ring can play what role in the...
- Medical equipment such as CT, light...
- Light Tan Huahuan importance in ele...
- Through-hole type concept of slip r...
- Slip ring fever serious emergency
- Working speed of the slip ring and ...
- Slip ring's important contribution ...
- Environmental equipment industry im...
- Slip Ring for Bow Thrusters
- Hydraulic Rotary Joints (BTY-0601A)
- Coax Rotary Joint (High frequency s...
- BTH1256 Through Bore Slip Ring for ...
- 6 Rings Slip Ring for Rolling Machi...
- Big Inner Diameter 6 Rings Slip Rin...
- BTH60130-8 Medical Equipment Use Th...
- ByTune BTH3899 Through Bore Slip Ri...
- Compact Capsule Slip Ring (BTC054-145)
- China factory CNC machining brass h...